You ever hang out in computer hardware forums and listen to people discuss water cooling with terms like quiet, or "it overclocks like crazy!...", or how about "..that new GPU block gave me 500 pts on this new benchmark!..."? Well those that are experienced in the ways of cooling your computer know quite well the benefits of water cooling. Even though it just doesn't make sense to mix electricity with water, you may have noticed that water cooling has gone mainstream in a major way during the past 15 months or so. On occasion ClubOC gets to revive the whole water cooling surge with a new product from some new company that wants to get a notch under their belt by introducing some new contraption using water as the main source to remove heat from a CPU. Unfortunately, most of the time those new systems fail miserably with higher temperatures than the heatsink/fan arrangement it was meant to replace. Well, ClubOC has played around with water cooler for over 7years, and we're here again to not disappoint you. Today we're here to show you the water cooling kit that is essentially the yardstick by which any other water cooling kit is measured by, and that kit is from Danger Den. We're talking about the Maze 4, and ClubOC has a custom configured kit to showcase what water cooling really is...

(Pictured from left to right: Maze 4 AMD Water block, Z-Chip AMD Block, Maze 4 GPU R9700/9800/FX Block)

Specifications

Maze 4 CPU Block

• Complete Block Assembled with Top and O-ring

• 4 nylon bolts, 12 nylon nuts, 4 springs for proper CPU attachment

• Machined and Lapped to 600 grit

• Pressure tested to 85psi

• 3/8 and 1/2 lines

• Available with Active Cooling (TEC)

• Optional SHDS (Socket Hold Down System)

Z-Chipset Block

• Mounts on boards with Center to Center Hole distances ranging form 2.10" - 2.43"

• 3/8 and 1/2 lines

• Available for Intel 865/875

• Available for AMD NB for Via and nForce

• Machined and Lapped to 600 grit

• Pressure tested to 85psi

• 2 nylon bolts, 4 nylon nuts, and 2 washers for proper NB placement

Maze 4 GPU Block

• For ATI R9700/9800 and GeForce FX series

• 2 Stainless Steel Bolts, Spacers, Nuts, and Springs

• Complete Block Assembled with Top and O-ring,

• Machined Lapped to 600 grit Final Lap to 1200 grit

• Pressure tested before shipment to 85psi

• 3/8 and 1/2 lines

• Optional Colors

• Available with Active Cooling (TEC)